![]() ![]() Reduces the load on the charging system by not connecting the auxiliary battery until the primary battery is charged to 13.Allows bi-directional charging from the alternator or from shore power.There are no efficiency losses due to diodes.Smaller and lighter than traditional isolators.Simple to install – connect to starting battery, auxiliary battery and ground.More flexible than traditional battery isolators.Note: This is a bulk product and has no manufacturer's box or instructions. With Schottky diode, to comply with Federal Spec.Smart Battery Isolators prevent loads on auxiliary battery from draining the starting battery. Used to isolate medical equipment batteries from vehicle batteries. Use with alternators that do not have integral electronic voltage regulator With Schottky diode, to comply with Federal Spec. ![]() For example, the 48051 with a rating of 75A has a per leg rating of 37.5A per leg. item 5 COLE HERSEE 48070 70A BATTERY ISOLATOR 12-36V DC 3-STUD S53 COLE HERSEE 48070 70A BATTERY ISOLATOR 12-36V DC 3-STUD S53. All Littelfuse Cole Hersee brand battery isolators have a per leg rating equal to half the alternator rating. item 4 Cole Hersee 48530 Smart Battery Isolator 200A Cole Hersee 48530 Smart Battery Isolator 200A. Integral heat sink provides efficient heat dissipationīattery isolators have a 'per leg' rating which indicates the maximum current it can deliver to either battery.Electronic components are embedded to give excellent protection from adverse conditions, such as contamination and vibration.General purpose Battery Isolators for 12-36V DC negative ground systems.A 4-stud battery isolator can be used with older pattern alternators (in this case the 4th stud will remain unconnected), but a 3-stud battery isolator cannot be used with the Delcotron-type alternator. The newer alternators were first introduced by Delco and are therefore sometimes called 'Delcotron-type alternators'. The small 4th stud is for connection to a circuit switched by the ignition switch. Most alternators on new vehicles have an integral electronic voltage regulator that requires the use of the 4-stud battery isolator. ![]() The amp rating of each item is the maximum alternator rating. In addition, both batteries can be charged simultaneously from one source. The sale and use of Littelfuse products is subject to Littelfuse Terms and Conditions of Sale, unless otherwise agreed by Littelfuse. "Littelfuse" includes Littelfuse, Inc., and all of its affiliate entities.įor vehicles with two batteries, these devices electrically isolate the batteries to prevent the battery with the higher charge from draining into that with the lower charge. Littelfuse shall not be liable for any claims or damages arising out of products used in applications not expressly intended by Littelfuse as set forth in applicable Littelfuse documentation. Warranties granted by Littelfuse shall be deemed void for products used for any purpose not expressly set forth in applicable Littelfuse documentation. Littelfuse products are not designed for, and shall not be used for, any purpose (including, without limitation, automotive, military, aerospace, medical, life-saving, life-sustaining or nuclear facility applications, devices intended for surgical implant into the body, or any other application in which the failure or lack of desired operation of the product may result in personal injury, death, or property damage) other than those expressly set forth in applicable Littelfuse product documentation. ![]()
0 Comments
Leave a Reply. |